2008 monza z32 set up help

shaun46 · 05-04-2012, 05:07 PM

hi, im after some help setting up my this chassis as this is my first birel/monza kart ive had. i was told the set up is the same as some birels but not sure which type. i would like to know settings for front stub axles, rear axle and which torsions bars to leave in or remove, it has one in middle of kart beside the seat what difference do this make in or out?. it dont have any caster/camber so am i best to buy some for it. engine im running on it is a biland sa250 any help would be great
thanks

Marc Miller · 05-24-2012, 08:10 AM

Hi Shaun-

This is the same model used to win the 2008 US Rotax Grand Nationals. It is a solid chassis. We have a baseline section just for this reason and this should be of help. Try this link:

http://www.mrpmotorsport.com/communi...ead.php?t=1833

05-04-2012, 05:07 PM	#1
shaun46 Rookie Join Date: May 2012 Posts: 1	2008 monza z32 set up help hi, im after some help setting up my this chassis as this is my first birel/monza kart ive had. i was told the set up is the same as some birels but not sure which type. i would like to know settings for front stub axles, rear axle and which torsions bars to leave in or remove, it has one in middle of kart beside the seat what difference do this make in or out?. it dont have any caster/camber so am i best to buy some for it. engine im running on it is a biland sa250 any help would be great thanks

05-24-2012, 08:10 AM	#2
Marc Miller Birel & Rotax Specialist Join Date: Jan 2008 Posts: 850	Hi Shaun- This is the same model used to win the 2008 US Rotax Grand Nationals. It is a solid chassis. We have a baseline section just for this reason and this should be of help. Try this link: http://www.mrpmotorsport.com/communi...ead.php?t=1833 __________________ Marc Miller Director of Brand Development MRP Motorsport/Birel

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode