|
|
02-15-2012, 08:55 PM
|
#1 |
|
Rookie
Join Date: Nov 2009
Posts: 9
|
Information on RY-28
Just purchased 2010 RY-28 and looking for specifications/setup information. Any thoughts out there?
Thanx! |
|
|
|
03-24-2012, 07:34 AM
|
#2 | |
|
Birel & Rotax Specialist
Join Date: Jan 2008
Posts: 850
|
Hi Scorekeeper,
The RYY28 was offered in 2010 and is the same design and specifications as the Birel RY30-S2 chassis but with all 28mm tubing. We suggest you use the RY30 baseline sheet as a reference for both set-up and adjustments. You can find the baselines in our "how to" section: http://www.birelamerica.com/index.php/how-to.html Quote:
__________________
Marc Miller Director of Brand Development MRP Motorsport/Birel |
|
|
|
|
|
03-27-2012, 09:05 PM
|
#3 |
|
Rookie
Join Date: Nov 2009
Posts: 9
|
Information on RY-28
Thanx Mark. I'll check it out.
|
|
|
|
|
04-17-2012, 08:10 PM
|
#4 |
|
Rookie
Join Date: Nov 2009
Posts: 9
|
Seat Position
Should I also use the RY-30S2 info for mounting the seat? It is a Tillet, if that matters.
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
