http://www.mrpmotorsport.com/community/ MRP Motorsport Community forums en Fri, 18 May 2012 01:41:20 GMT vBulletin 60 http://www.mrpmotorsport.com/community/images/imagination/misc/rss.jpg http://www.mrpmotorsport.com/community/ http://www.mrpmotorsport.com/community/showthread.php?t=2860&goto=newpost Thu, 10 May 2012 23:32:48 GMT Looking for recommendations on buying a used Birel for my 9 YO. He is about 50 " tall, weighs about 50 lbs. Ran Kid Kart last year at East Lansing, MI. Need to move up to 8 - 12 Clone Sportsman (265 lb weight). I have a line on an AR1, but I understand that is a 1040 mm wheelbase. I'm thinking he needs a 900 MM or 950 MM.

Birels do well at ELKT. And a friend is running one so hpoefully we can learn from each other. Looking to be able to share our knowledge

Not ready to buy new, until we are sure that he wants to stay with it. On the other hand, want good enough equipment that we don't set ourselves up for failure. Thinking $1,000 to $1,500 for a roller?

Thanks for the help, and the great forum. I've learned a lot in just a few hours ]]> Work4Ever http://www.mrpmotorsport.com/community/showthread.php?t=2860 http://www.mrpmotorsport.com/community/showthread.php?t=2859&goto=newpost Fri, 04 May 2012 22:07:11 GMT hi, im after some help setting up my this chassis as this is my first birel/monza kart ive had. i was told the set up is the same as some birels but... hi, im after some help setting up my this chassis as this is my first birel/monza kart ive had. i was told the set up is the same as some birels but not sure which type. i would like to know settings for front stub axles, rear axle and which torsions bars to leave in or remove, it has one in middle of kart beside the seat what difference do this make in or out?. it dont have any caster/camber so am i best to buy some for it. engine im running on it is a biland sa250 any help would be great
thanks ]]> shaun46 http://www.mrpmotorsport.com/community/showthread.php?t=2859 http://www.mrpmotorsport.com/community/showthread.php?t=2858&goto=newpost Thu, 03 May 2012 15:10:05 GMT Q30 Baseline The Birel Q30 baseline will be similar to the R30 with a couple small adjustments. With 40mm axle: 1040x3 F axle, middle bearing... Q30 Baseline

The Birel Q30 baseline will be similar to the R30 with a couple small adjustments.

With 40mm axle: 1040x3 F axle, middle bearing tight, 100mm hubs set at 23 cm from the cassette to the end of the hub, spindles down, .5 degree caster pills IN, 17mm spindles with 75mm hubs set at 2 thick and two thin spacer wide. ]]> Marc Miller http://www.mrpmotorsport.com/community/showthread.php?t=2858 http://www.mrpmotorsport.com/community/showthread.php?t=2857&goto=newpost Tue, 24 Apr 2012 01:38:05 GMT I need help with a R31 chassis I picked up last year- not sure if this forum is still used or not. Please advise. I need help with a R31 chassis I picked up last year- not sure if this forum is still used or not. Please advise. ]]> tmiller45m http://www.mrpmotorsport.com/community/showthread.php?t=2857