View Full Version : Front End
As far as the rear end is cocerned i understood what to do. Now if the front end hops on tight bends, what i have to do to eliminate this situation
03-27-2006, 06:34 AM
I would start with widening the front track width. The problem might stem from the rear of the kart having too much grip causing the kart to push in the fast cormers and buck in the slow corners. More caster will help, moving the seat forward will help, softer axle, etc. Hope this helps.
So the solution to my problem that is to add more grip in front?
John M. Skowron
03-27-2006, 12:48 PM
I had the same problem last year. I solved it by widening the front end a full spacer on each side.
vBulletin® v3.8.4, Copyright ©2000-2013, Jelsoft Enterprises Ltd.