View Full Version : Front Tyre Wear ?
03-24-2005, 12:47 PM
I am racing on a R32SP chassis, I am having problems with my front tyres wearing at angle in fact I am sure the outside edges of the tyre donít touch the track. I have checked my camber setting 2mm open at the bottom with 0mm toe in/out. Any suggestions to improve this would be helpful thanks.
03-24-2005, 01:18 PM
Is the kart not handling properly? What tire compound are you using and what is the application. Normally we run from 0 to 4mm negative camber with a YHB tire. After 50 laps or so it is normal to see a bit more tire wear on the inside of the tire, especially with a yh tire as the front tires are "rounded" instead of "square". let me know if this helps.
I hve the same problem on my CR31SP. The left tyre wears too much on the inside. I have 1mm negative camber with the driver in the kart. I use white Vegas. This happens from the 10 lap and up. Is it normal or i have to change something?
vBulletin® v3.8.4, Copyright ©2000-2017, Jelsoft Enterprises Ltd.