PDA

View Full Version : Chassis Set-up


Alex
03-21-2005, 02:27 AM
I am racing with CR31SP. During race meetings i have too much rear grip in tight corners( the kart bounces). My settings are with White Vegas, Total weight 183kg and Temperature 20'C
Front Pressures: .65bar
Rear " : .60bar
Front: 5 lines
Rear: 139
Loose rear pumber, no rear torsion bar, Axle yellow, 2 seat sruts on the left one on th right, standar rear hups, seat 21cm from axle.
Please advice what can i do to avoid this situation. Thanks

Wesley Boswell
03-21-2005, 01:09 PM
Alex,

Is the axle up or down? The karts come standard with the axle down. If this is the case I would start out by moving the axle up which would lower the chassis, and create less grip.

~Wesley Boswell