Marc Miller
03-09-2010, 10:30 AM
ATTENTION MICHIANA RACEWAY PARK RACERS- Below is rear bumper information for both WKA & Rotax fopr 2010 season.
209.3 REAR BUMPER: All Karts must be equipped with a rear bumper to protect the driver and Kart from rear impact and to keep the following Kart from reaching the rear tires. The Bumper may be either CIK style "Rear wheel protection" or a double bar design.
ROTAX: JUNIOR, SENIOR AND MASTERS CLASSES, must have CIK Plastic. Micro and Mini can still use the hoop.
USRMC 3.0 BODY WORK - BUMPERS – NERF BARS –
ALL CLASSES - CIK RULE 2.5.3 REAR WHEEL PROTECTION -
In all conditions, the rear protection must at no time protrude beyond the external plane of the rear tires.
JUNIOR, SENIOR AND MASTERS CLASSES:
CIK RULE 2.7.1.4
Side pod protrusion rule outboard of the quadrilateral formed by the four wheels is applicable.
“WET CONDITIONS” – Side body work may not be located outside the plane passing through the outer edge of rear tires.
CIK Rule 2.5.3
Rear Wheel Protection – In all conditions, the rear protection must at no time protrude beyond the external plane of the rear wheels.
Rear Protection- CIK Homologated plastic rear protection system required. Non homologated systems may be submitted to USRMC National Technical Director for approval. No modifications to chassis in regards to mounting of rear protection system. Minimum width of rear protection system under all conditions 134cm.
209.3 REAR BUMPER: All Karts must be equipped with a rear bumper to protect the driver and Kart from rear impact and to keep the following Kart from reaching the rear tires. The Bumper may be either CIK style "Rear wheel protection" or a double bar design.
ROTAX: JUNIOR, SENIOR AND MASTERS CLASSES, must have CIK Plastic. Micro and Mini can still use the hoop.
USRMC 3.0 BODY WORK - BUMPERS – NERF BARS –
ALL CLASSES - CIK RULE 2.5.3 REAR WHEEL PROTECTION -
In all conditions, the rear protection must at no time protrude beyond the external plane of the rear tires.
JUNIOR, SENIOR AND MASTERS CLASSES:
CIK RULE 2.7.1.4
Side pod protrusion rule outboard of the quadrilateral formed by the four wheels is applicable.
“WET CONDITIONS” – Side body work may not be located outside the plane passing through the outer edge of rear tires.
CIK Rule 2.5.3
Rear Wheel Protection – In all conditions, the rear protection must at no time protrude beyond the external plane of the rear wheels.
Rear Protection- CIK Homologated plastic rear protection system required. Non homologated systems may be submitted to USRMC National Technical Director for approval. No modifications to chassis in regards to mounting of rear protection system. Minimum width of rear protection system under all conditions 134cm.