AR28Z assembly

[shorte]

Do the unibol spacers (washers with the neck) go on top or the bottom of the tie rod ends,and do they get used on the steering shaft? The illistrations are not very clear in the parts catalog.


Thanks

[Chris Lobaugh]

Put the spacers on top of the spindle. I also use one set under the steering shaft (between the shaft and the rod end) and then a small o.d. washer and standard washer under the rod end...does that make sense?

[shorte]

I think so. The small diameter washer actually contacts the tie rod end - not the small end of the neck on the spacer.Correct?