RX30SE Base setup

[dangreen]

I bought a 2008 RX30SE for my son and would like to have a factory baseline to start from.

[Chris Lobaugh]

If you have a look a bit further down the page there is a post titled "Ryan Stewarts RX30SE set up from Norway" where you will find a very solid starting point to work from. This set up is for Senior Sportsman which utilizes 7.10" tires. If your son is racing in Junior Supercan or HPV Jr. you will need to set the rear to 52" and the seat dimensions will be a bit different due to the difference in size of the seat. If you let me know some of the specifics we can go from there, however, the rest of the information (front end geometry, axle, torsion bar set up) should be spot on. Hope this helps.

[PatrickT]

Are the toe, camber, and caster settings all with the kart on the stand?

[Chris Lobaugh]

Yes...it makes it much easier to duplicate when the kart is unloaded (without a driver in the seat) and on a stand.