Cadet Wheel question

[Mike41]

The ideal wheels were 4.75" for the front and 5.5" for the rear, correct? Were the front wheels the DSM type(the ones with the 17mm bearing)? And lastly does anyone have the Douglas part numbers for the front and the rear? Thanks, Mike

[Mike41]

Does M555 -70518, 70519, or 70520 ring a bell? These are all part numbers for the 5 1/2" rear wheels. The 70518 when measured from the inside to the middle weld line is 2" and then 3.5" to the outside. The 70519 is 3" to the middle and then 2.5" to the outside and the 70520 is 2.5" to the middle and 3" to the outside. So which wheel is the best application for the rear? Thanks for any help. Mike

[Bill Cary]

For some reason, the questions about these 4.75" DSM and 5.5" aluminum wheels seem to be a black hole with no answers to be found!!

[Steve Miller]

We recieved a confirmation from Douglas Wheel that they have shipped me 40 of the mysterious 4.75" DSM wheel. Not sure when they will arrive?

[Mike41]

Steve,

I received the rear wheels from you, Thanks!

Let me know when you receive the fronts and I may try a pair of those also.

Thanks,

Mike

[Steve Miller]

fronts in stock now!